您的位置:首页>>产品中心>>伊顿UPS电源(EATON)
  • 伊顿UPS电源(EATON)

伊顿PW5115 1400i USB

产品分类:伊顿UPS电源(EATON)

发布日期:2024-11-22 9:43:3

市场价格:¥0.00

本站价格:¥0.00

产品简介:

伊顿UPS电源 PW5115 1400I USB 内置蓄电池 1400VA/850W

Eaton 5115 UPS Technical Specs (North America)

 Model Selection Guide
 Battery Runtimes

Electrical Input
 Voltage 120 and 230 Vac Nominal; see Model Selection Guide for user-selectable voltages
 On Line Voltage Range +20% for nominal voltage at full load
 Nominal Input Frequency 45-65 Hz, 50/60 Hz; auto-sensing
 Input Protection 120 V models: Reset-able circuit breaker
230 V models: AC source overcurrent protection device (required)
 Connection 120 V models: 6 ft. cord w/5-I5P
230 V models: IEC-320, 10A male connector
Electrical Output
 Power Levels  500-1400 VA
 Online Regulation  -10%, +6% of nominal voltage
 On Battery Voltage Regulation  +/-5% of nominal voltage; -10% after low battery warning
 On Battery Frequency Regulation  +/-0.1 Hz of nominal frequency
 Voltage Wave Shape  Sine wave (during normal and battery operation)
 Connections  See Model Selection Guide
 Interconnecting Cords (230V models)  2 ea. IEC-320, 10A
Indicators and Controls
 Front Panel LEDs  Power on, on battery, overload, and battery fault
 Front Panel Buttons  On/Off and alarm silence/self-test
 Communications Port  DB9 female (UPS ships with communications cable); USB Interface Adapter is optional
 Power Factor  500 VA: 0.64
750/1000 VA: 0.67
1400 VA: 0.68
Battery
 Battery Type  Sealed, maintenance-free lead-acid; starved electrolyte
 Battery Description  500 VA: (1) 12 V, 9 Ah
750 VA: (2) 12 V, 7.2 Ah
1000 VA: (2) 12 V, 9 Ah
1400 VA: (3) 12 V, 9 Ah
 Battery Recharge  < 3 hours to 90% capacity
 Battery Runtime  5 minutes minimum; See Battery Runtimes table
 Start-On-Battery  Startup with UPS batteries in absence of utility power
General
 Topology  Line-interactive
 Dimensions and Weight  see Model Selection Guide
 Network Transient Protector  In and out RJ11 jack for telephone/modem protection (120 V models only) or RJ45 for 10Base-T network cable; UL497A tested
Environmental and safety
 Operating Temperature 0oC to 40oC (32oF to 104oF) UL tested at 25oC (77oF)
 Safety Markings  UL, cUL, and CSA; 230V models also CE and TUV
 Safety Conformance  UL 1778, CAN/CSA C22.2, No. 107.1; 230 V models also EN 50091-1-1 and IEC 60950
 EMC Markings  FCC Class B; 230 V models also CE (EN50091-2) and C-Tick
 Surge Suppression  ANSI C62.41 Category A (formerly IEEE 587)
 Immunity  IEC 801-2, -3, -4
 Transit/Storage Temp. -15ºC to 55ºC (5ºF to 131ºF)
 Audible Noise  < 45 dBA typical
 Relative Humidity  5-95% non-condensing

* Due to continuing product improvement programs, specifications subject to change without notice

 Model Selection Guide

Model Number Power Out (VA/Watts) Input Connection Output Connections Dimensions HxWxD, (in./mm) Unit Weight (lb/kg)
120 VAC1, 60 Hz auto-sensing
PW5115 500 500/320 5-15P (4) 5-15R 7.6x5.9x10.6/193x150x270 17.2/7.8
PW5115 750 750/500 5-15P (4) 5-15R 7.6x5.9x13.2/193x150x335 27.3/12.4
PW5115 1000 1000/670 5-15P (6) 5-15R 15.1x5.9x13.2/380x150x335 27.8/12.6
PW5115 1400 1400/950 5-15P (6) 5-15R 15.1x5.9x15.4/380x150x390 37.0/16.8
230 VAC2, 60 Hz auto-sensing
PW5115 500i 500/320 IEC-320, 10A (4) IEC-320 7.6x5.9x10.6/193x150x270 17.2/7.8
PW5115 750i 750/500 IEC-320, 10A (4) IEC-320 7.6x5.9x13.2/193x150x335 27.3/12.4
PW5115 1000i 1000/670 IEC-320, 10A (6) IEC-320 7.6x5.9x13.2/193x150x335 27.8/12.6
PW5115 1400i 1400/950 IEC-320, 10A (6) IEC-320 7.6x5.9x15.4/193x150x390 37.0/16.8
1 Also user-selectable for 110V via rear panel DIP switches.
2 230 V default; also user-selectable for 220 and 240 V via rear panel DIP switches

Battery Run Times (in minutes)

Load PW5115 500(i) PW5115 750(i) PW5115 1000(i) PW 5115 1400(i)
200 VA / 128 W 17 38 41 58
300 VA / 192 W 11 27 28 41
500 VA / 320 W 5 14 15 28
600 VA / 402 W10   9 10 19
750 VA / 503 W   6 8 14
900 VA / 603 W     6 10
1000 VA / 670 W     5 8
1200 VA / 804 W       6
1400 VA / 938 W       5