伊顿UPS电源 PW5115 750i USB 750VA/
Eaton 5115 UPS Technical Specs (North America)
Model Selection Guide
Battery Runtimes
Electrical Input
Voltage 120 and 230 Vac Nominal; see Model Selection Guide for user-selectable voltages
On Line Voltage Range +20% for nominal voltage at full load
Nominal Input Frequency 45-65 Hz, 50/60 Hz; auto-sensing
Input Protection 120 V models: Reset-able circuit breaker
230 V models: AC source overcurrent protection device (required)
Connection 120 V models: 6 ft. cord w/5-I5P
230 V models: IEC-320, 10A male connector
Electrical Output
Power Levels 500-1400 VA
Online Regulation -10%, +6% of nominal voltage
On Battery Voltage Regulation +/-5% of nominal voltage; -10% after low battery warning
On Battery Frequency Regulation +/-0.1 Hz of nominal frequency
Voltage Wave Shape Sine wave (during normal and battery operation)
Connections See Model Selection Guide
Interconnecting Cords (230V models) 2 ea. IEC-320, 10A
Indicators and Controls
Front Panel LEDs Power on, on battery, overload, and battery fault
Front Panel Buttons On/Off and alarm silence/self-test
Communications Port DB9 female (UPS ships with communications cable); USB Interface Adapter is optional
Power Factor 500 VA: 0.64
750/1000 VA: 0.67
1400 VA: 0.68
Battery
Battery Type Sealed, maintenance-free lead-acid; starved electrolyte
Battery Description 500 VA: (1) 12 V, 9 Ah
750 VA: (2) 12 V, 7.2 Ah
1000 VA: (2) 12 V, 9 Ah
1400 VA: (3) 12 V, 9 Ah
Battery Recharge < 3 hours to 90% capacity
Battery Runtime 5 minutes minimum; See Battery Runtimes table
Start-On-Battery Startup with UPS batteries in absence of utility power
General
PW5115 1000 1000/670 5-15P (6) 5-15R 15.1x5.9x13.2/380x150x335 27.8/12.6
PW5115 1400 1400/950 5-15P (6) 5-15R 15.1x5.9x15.4/380x150x390 37.0/16.8
230 VAC2, 60 Hz auto-sensing
PW5115 500i 500/320 IEC-320, 10A (4) IEC-320 7.6x5.9x10.6/193x150x270 17.2/7.8
PW5115 750i 750/500 IEC-320, 10A (4) IEC-320 7.6x5.9x13.2/193x150x335 27.3/12.4
PW5115 1000i 1000/670 IEC-320, 10A (6) IEC-320 7.6x5.9x13.2/193x150x335 27.8/12.6
PW5115 1400i 1400/950 IEC-320, 10A (6) IEC-320 7.6x5.9x15.4/193x150x390 37.0/16.8
1 Also user-selectable for 110V via rear panel DIP switches.
2 230 V default; also user-selectable for 220 and 240 V via rear panel DIP switches
Battery Run Times (in minutes)
Load PW5115 500(i) PW5115 750(i) PW5115 1000(i) PW 5115 1400(i)
200 VA / 128 W 17 38 41 58
300 VA / 192 W 11 27 28 41
500 VA / 320 W 5 14 15 28
600 VA / 402 W10 9 10 19
750 VA / 503 W 6 8 14
900 VA / 603 W 6 10
1000 VA / 670 W 5 8
1200 VA / 804 W 6
1400 VA / 938 W 5